Oh danr it
Im online…
1 Like
If you like flying the Loach, it doesn’t get much better than the Into the Jungle sandbox.
@maico and I returning from a double CSAR mission, delivering some very thirsty downed pilots to a busy MASH hospital. He did most of the killing while I did most of the rescuing.
6 Likes
He exagerates, I did most of the dying, while he did all the heavy lifting. It was a very good time.
Thank you for hosting. This was a very impressive mission. There is so much to do and discover.
Thank You Dan!
1 Like
FYI, even after rebuilding the server from the ground up and leaving out all but the necessary mods, I wasn’t able to determine what is causing the problems with the elevation mesh at Antonio. The following aircraft are affected at Antonio spawn: F-4E non alert a/c (alert jets are fine), OH-6A a/c, UH-1H a/c. OV-10 a/c are good to go. The OH-6A spawn and are dropped hard on the ramp causing a rotor blade to break off. The UH-1H aircraft are inverted, and the non alert F-4E a/c have their main gear collapsed, as if they were dropped hard on the ramp. TBH, it doesn’t affect OH-6A ops much, because you mostly want to spawn near the battle. Phantom and UH-1H ops are affected if you must have a C&D aircraft at Antonio. Still, would like to know why/how my environment is different from others.
The I2J team is soon to release a new version with the AC-130 Spooky mod, so hopefully with a new mission build, my ded server issues will be solved.
Yeeha, fixed the broken props at spawn issue. There was a script that needed to be running on the server. We are good to go.
4 Likes
Great News !
Does anyone want to get together Saturday afternoon/evening and fly? @Maico and I had so much fun flying the Into the Jungle mission (Vietnam sandbox), that I’d recommend that. Last night I was doing a CSAR in the Loach by myself and got shot to hell trying to pickup the pilot. I could have really used a gunship or an OV-10 with rockets to keep Charlie more respectful. Good example of I2J CAS here.
3 Likes
YES PLEASE! I am in like Flyn. Ill keep the AAA respectful or die trying LOL
1 Like
I’d love to join! Been a while since I’ve flown but this sounds like it’s right up my alley!
I’m available in this time range:
2025-03-29T19:00:00Z→2025-03-29T23:00:00Z but no later! We’re changing to CEST this weekend and I have an early appointment the next morning
I have basic helicopter proficiency, would love to fly the Loach and am happy to wear the A-4 if more firepower is needed. I’m used to the European spinning rotors but I’m sure I can get used to pushing the other pedal in a few minutes.
Could you pick a time when you’re available and post it via the 
icon on top of the comment editing window?
2 Likes
I’ll be on the same time Freak. I updated the original post with those details. Will be great to have you on. Server info is a couple of posts from the top.
NOTE: Change from the first meeting… Everyone Must Have the C-130 Mod.
1 Like
Oh wow that’s great, thanks for hopping in the pit so early, looking forward to tomorrow!
I’ll make sure to update DCS and then install all the necessary mods
1 Like
I have a haircut at 1130AM. I will get there early to see if they can get it done. If not I will skip it. Look for Me to be on no later than 12:30
I need to test my Comms tonight. Is anyone on tonight for a test?
I should be on tonight about 2025-03-29T00:00:00Z
I will be on about 2025-03-29T19:30:00Z
3 Likes
I’ll be there!
I’m just downloading all the mods and I see this on the Bronco page:
EDIT: We are aware of the gear problem due to the Multi threading version, sorry for that.
Have you been using the multi-threaded version? Is it OK if I use the multi-threaded DCS client while flying other aircraft on the server? I assume this only impacts the client itself
I’m using the multi-threaded client. I’m not sure how it affects the Bronco, but will give it a test today,
1 Like
No need, if you’ve been using multithreaded I’ll stick with it too. I’m happy with just the Loach and A-4
1 Like
Just fyi, the current DCS version is already multi-threaded only, iirc the bin-mt folder only still exists so it doesn’t break shortcuts for users but afaik you can expect it to disappear in a future update.
2 Likes
That makes sense, I was kind of surprised to still see the folder there after the update.
Just caught up on a year of DCS VR maintenance: downloaded the DCS update, driver update, DLSS swapper, Nvidia Profile Inspector, and all the mods.
Did a quick first flight in the OH-6 (hot start) to make sure my axes are bound correctly, and then a flight in the A-4 to check my previous bindings are still working and that I didn’t plug anything into the wrong USB port.
The performance boost using the latest DLSS version, profile K, is huge on my RTX 3080 10GB with 5800X3D+32GB. I’ve set DLSS to the max performance in DCS settings and it still looks as good as the old balanced setting, but it seems (I did not A/B-test, this is just by feel) I am one step higher in VR framerate than I used to be. 60 fps where it used to be 45, 75 fps where it uses to be 60.
Looking forward to the multiplayer sesh in an hour. I hope I installed all the mods correctly!
2 Likes