Troll
November 5, 2018, 1:15pm
81
Here’s a link to my Radar handle build, where I adress the resistor issue. Although I have never had this problem with just one TLE sensor, only when more than one is used.
I almost forgot!
You have to remove the resistor on the MISO line of the TLE magnetic sensor in order to use more than one sensor, and substitute it with a resistor on the MISO line of the controller.
I had this problem on my ConTrollR throttle box as well. Only the first sensor worked. Pretty darn frustrating, until I contacted Mega_Mozg (the author of the MMJoy2 firmware for the controller) who knew exactly what the problem was.
It’s the resistor on the left of the TLE5010 sensor in the pic…